H2S and SULF Sensor Calibration Kit
The hydrogen sulfide calibration kit is for both versions of the H2S microsensors, SULF and H2S. With this kit, you can eliminate the tedious and time-consuming preparation of standards with oxygen-free inert gas or reductants to make anaerobic solutions. Read more...
Calibrate in the lab or in the field
With the H2S calibration kit, you do not need to buy expensive and toxic H2S gas mixes to validate H2S standards. The kit contains everything you need for an easy and cost-effective calibration of your H2S microsensor.
The kit comes with reagents for 10 single-use calibrations. It is non-hazardous and includes a validated H2S concentration towards a certified gas mixture.
Feature | Standard |
---|---|
Feature
Number of calibrations/kit
|
Standard
10
|
Feature
Minimum lifetime (months)
|
Standard
6
|
Feature
Box contents
|
Standard
10 x exetainers w. H2S stock solution | 10 x exetainers w. mixing solution | 1 x Calibration Cap w. 3 cm flexible tube | 1 x 1 ml syringe | 1 x 10 ml syringe | 1 x 80*2.1 mm needle | 1 x 40*0.6 mm needle | Glass beads for mixing
|
Feature
Solution content
|
Standard
Stock solution: Alkaline anoxic solution with zink-sulfide precipitate. | Mixing solution: diluted anoxic HCL solution pH 2.1
|
Feature
Validation method
|
Standard
Batch tested against solutions brought into equilibrium with a H2S/N2 mix with certified concentrations at controlled temp. Concentration calculated according to Morse J.W., Millero F.J., Cornwell J.C., & Rickard D. 1987
|
Feature
Certifying body
|
Standard
Nippon gases
|
Feature
Compatibility
|
Standard
All Unisense H2S sensors (SULF- and H2S-types)
|
Feature
Exceptions
|
Standard
High range sensors (mM range) | Some custom made sensors (contact us)
|
Product | Description |
---|---|
Product
Calkit-H2S
|
Description
H2S and SULF sensor calibration kit | For 10 calibrations
|
Video Guides
Application Scientist Tage Dalsgaard shows you how to perform a 2-point calibration with H2S free water and one known H2S concentration
Manual
Safety Data Sheets
Quick Enquiry
Related products
Detect hydrogen sulfide in your sample
Accurate, fast, and easy calibration
10 ready-to-use vials for calibration of our oxygen sensors and optodes
Ready-to-use and certified buffers for calibration at pH 4.01 and pH 9.18
10 validated, single-use vials for standard or high concentration N2O calibration.
10 ready-to-use vials for simple one-point calibration of Redox microelectrodes
Easy calibration of sensors with CAL300