NO-100
MR sensor
fx-6 UniAmp
Designed for research applications within:
Environmental Sciences
Biomedical Sciences
Biotechnology
Wastewater

NO Microsensor

Measure minute concentrations of nitric oxide

The NO microsensor offers you a very high sensitivity, and when you add in the fast response time, you get an excellent research tool to measure minute concentrations of nitric oxide. Read more...

Read More
Technical Data
Ordering Information & Sizes
Customizations
Manuals & Videos
Quick Enquiry
NO Microsensor

Measure minute concentrations of nitric oxide

Nitric oxide plays an important role in many biological processes. However, natural concentrations are often in the nanomolar range. The Unisense NO microsensor is characterized by a very high sensitivity, which enables you to measure minute concentrations of NO. Combined with a fast response time the Unisense NO microsensor is an excellent research tool for a broad range of tasks.

The sensor can be used equally well for NO measurements in tissue, air, or liquid, and is applied in a broad variety of research fields where non-destructive, fast, and accurate measurements are required.

The NO microsensors are Clark-type sensors measuring the external NO partial pressure. The working principle of the sensor is based on diffusion of NO through a silicone membrane to an NO oxidizing anode, which is polarized against an internal counter cathode. The resulting sensor signal is in the pA range and is measured by a high quality picoammeter, such as the UniAmp Multi Channel.

Compared to other standard NO sensors, the Unisense NO microsensor has an extremely low consumption of max. 935 pmol/hour corresponding to 0.1%/hour in a 1 mL 0.1uM NO sample.

NO-10_1400x800
Characteristics
Stirring Sensitivity & Response Time
Characteristics
Attribute Standard
Attribute
Lifetime
Standard
3 months (min)
Attribute
Linear range
Standard
0-3 µM
Attribute
Detection limit 15 µm tip
Standard
20-30 nM
Attribute
Detection limit 50 µm tip
Standard
4-6 nM
Attribute
Detection limit 100 µm tip
Standard
2-3 nM
Attribute
Detection limit 500 µm tip and FT-cell
Standard
2-3 nM
Attribute
Zero current (approx.) 15 µm tip
Standard
2 pA
Attribute
Zero current (approx.) 50 µm tip
Standard
15 pA
Attribute
Zero current (approx.) 100 µm tip
Standard
25 pA
Attribute
Zero current (approx.) 500 µm tip and FT-cell
Standard
30 pA
Attribute
Reported Interferents
Standard
H₂S | NO₂ (gas) | HNO₂ (gas) | Light | TMPD | PMS
Stirring Sensitivity & Response Time
Nitric Oxide sensor Sensitivity (approx.) Stirring Sensitivity (approx.) Response Time (90%) (approx.)
Nitric Oxide sensor
15 µm tip
Sensitivity (approx.)
3 pA/µM
Stirring Sensitivity (approx.)
10%
Response Time (90%) (approx.)
<1 s
Nitric Oxide sensor
50 µm tip
Sensitivity (approx.)
15 pA/µM
Stirring Sensitivity (approx.)
20%
Response Time (90%) (approx.)
<10 s
Nitric Oxide sensor
100 µm tip
Sensitivity (approx.)
25 pA/µM
Stirring Sensitivity (approx.)
25%
Response Time (90%) (approx.)
<10 s
Nitric Oxide sensor
500 µm tip and FT-cell
Sensitivity (approx.)
25 pA/µM
Stirring Sensitivity (approx.)
25%
Response Time (90%) (approx.)
<10 s
Ordering information & Sizes
Ordering information & Sizes
Nitric Oxide Sensor Size and description
Nitric Oxide Sensor
NO-15
Size and description
15-20 µm - glass sensor
Nitric Oxide Sensor
NO-50
Size and description
40-60 µm - glass sensor
Nitric Oxide Sensor
NO-100
Size and description
90-110 µm - glass sensor
Nitric Oxide Sensor
NO-500
Size and description
400-600 µm - glass sensor
Nitric Oxide Sensor
NO-MR
Size and description
400-600 µm - in guide
Nitric Oxide Sensor
NO-NP
Size and description
1.6 x 40 mm - needle sensor for piercing
Nitric Oxide Sensor
NO-ST-1/4
Size and description
1/4'' steel tube
Nitric Oxide Sensor
NO-SL-1/4
Size and description
FT-cell 1/4'' Swagelok Tee
Nitric Oxide Sensor
NO-SL-1/8
Size and description
FT-cell 1/8'' Swagelok Tee
Nitric Oxide Sensor
NO-PEEK-1/8
Size and description
FT-cell 1/8'' PEEK Tee
Nitric Oxide Sensor
NO-PEEK-1/16
Size and description
FT-cell 1/16'' PEEK Tee
Nitric Oxide Sensor
NO-FT-GLASS-6
Size and description
Glass FT-cell 6 mm outer diameter
Nitric Oxide Sensor
NO-FT-GLASS-8
Size and description
Glass FT-cell 8 mm outer diameter

Video Guides

thumbnail
Quick Guide NO Microsensors

Watch this quick guide to learn about the sensor's most important measuring characteristics, specifications, and customizations

Quick Enquiry

    If you complete the form below, we will send you a quote as soon as possible to give you a quick price indication.

    Which sensor(s) are you interested in?

    Do you have a Unisense amplifier?

    Are you interested in one of our lab systems?

    Are you interested in one of our field systems?

    We will use your e-mail for our newsletter. That's it.
    You can unsubscribe at any time.

    Related publications

    Nitric oxide microsensor for high spatial resolution measurements in biofilms and sediments
    Schreiber, Frank et al. (2008), Analytical Chemistry, vol. 80, 1152-1158
    Read more
    Nitrite-driven anaerobic methane oxidation by oxygenic bacteria
    Ettwig, Katharina F. et al. (2010), Nature, vol. 464, 543-548
    Read more
    Generation of nitric oxide from nitrite by carbonic anhydrase: A possible link between metabolic activity⁠…
    Aamand, Rasmus et al. (2009), American Journal of Physiology - Heart and Circulatory Physiology, vol. 297, H2068-H2074
    Read more
    Nitric-oxide-driven oxygen release in anoxic Pseudomonas aeruginosa
    Lichtenberg, Mads et al. (2021), iScience, vol. 24, 103404
    Read more