UniAmp Single Channel
With the UniAmp Single Channel, you get our most cost-effective solutions with dedicated channel configuration for O2, pH/mV, H2, N2O, and H2S. You should consider the UniAmp Multi Channel, if you need multiple sensors or a system that is more flexible for future applications. Read more...
Amplifier solutions with unique features
- Temperature compensation of sensor data
- E2PROM recognition of unique sensor data
- USB-powered
- Cost-effective solutions for dedicated measuring needs
- Easy-to-use, simple, and smart
UniAmp Single Channel is available in various configurations with dedicated channels for O2, pH/mV, H2, N2O, or H2S. All versions include one channel for a temperature sensor for temperature compensation of data.
The amplifier is USB powered, and the sensors immediately polarize when connected. Connect the UniAmp to your PC to automatically initiate the Windows service app. In the app, you can quickly review raw data and amplifier settings. You can calibrate and log data via our uSense Solutions apps.
Temperature compensation
Sensor temperature compensation was once reserved for optical sensors. However, based on long-time in-house data temperature compensation is available for our O2, N2O, H2, and H2S microsensors.
The compensation covers +/- 3°C from calibration point, thus ensuring you better data. With a standard sensor coefficient of 2-3% per degree Celsius, small sample temperature changes from calibration point of a few degrees will result in considerable errors. With our temperature compensation algorithm, the system will compensate and ensure more accurate data.
Each sensor comes with a factory value for temperature compensation, but you can measure your own value for the sensor and apply this value.
E2PROM sensor connectors
The 10 pin E2PROM sensor connector reads important information about sensor type, sensor configurations, serial number, calibration data, and the unique value for individual temperature compensation. User calibration can also be stored on the E2PROM to save time during setup and provide flexibility for using multiple sensors and amplifiers. All E2PROM information is read by the UniAmp ensuring correct sensor polarization and setup. Data are transferred to our uSense Solutions software for enhanced user experience and experimental documentation.
The new connector format allows for support of our specialized sensors like the STOX sensor for measuring ultra-low (<5nM) oxygen concentrations.
| Attribute | Standard |
|---|---|
|
Attribute
Dimensions
|
Standard
225 x 165 x 50 mm (W x D x H)
|
|
Attribute
Weight
|
Standard
Approx. 1.4 kg (3.1 lbs)
|
|
Attribute
Temperature range
|
Standard
Operating conditions 0°C - 50°C (<90% RH non-condensing)
|
|
Attribute
Warranty
|
Standard
1 year
|
|
Attribute
Certification
|
Standard
CE
|
| Picoampere | pH/mV | Temperature | Pressure | |
|---|---|---|---|---|
|
Sensor
|
Picoampere
Snap connector 10 pin
|
pH/mV
Snap connector 10 pin
|
Temperature
Snap connector 4 pin
|
Pressure
Built-in
|
|
Reference (for mV channels)
|
Picoampere
N/A
|
pH/mV
Banana plug on the cable
|
Temperature
N/A
|
Pressure
N/A
|
|
Grounding
|
Picoampere
Banana plug
|
pH/mV
Banana plug
|
Temperature
Banana plug
|
Pressure
Banana plug
|
|
Polarization
|
Picoampere
Digitally adjustable
|
pH/mV
N/A
|
Temperature
N/A
|
Pressure
N/A
|
|
Polarization range
|
Picoampere
±1.8 V
|
pH/mV
N/A
|
Temperature
N/A
|
Pressure
N/A
|
|
Input range
|
Picoampere
±500 pA - 500 nA
|
pH/mV
±5000 mV
|
Temperature
-10 to 100°C
|
Pressure
300-1,200 mbar
|
|
Input impedance
|
Picoampere
N/A
|
pH/mV
>10¹³ Ohm
|
Temperature
N/A
|
Pressure
N/A
|
| Picoampere | pH/mV | Temperature | Pressure | |
|---|---|---|---|---|
|
Power supply
|
Picoampere
USB
|
pH/mV
USB
|
Temperature
USB
|
Pressure
USB
|
|
Specification
|
Picoampere
5V@500 mA (Max 350 mA draw)
|
pH/mV
5V@500 mA (Max 350 mA draw)
|
Temperature
5V@500 mA (Max 350 mA draw)
|
Pressure
5V@500 mA (Max 350 mA draw)
|
|
Resolution
|
Picoampere
16 bit
|
pH/mV
16 bit
|
Temperature
16 bit
|
Pressure
24 bit
|
|
Sampling frequency
|
Picoampere
Digitally adjustable
|
pH/mV
Digitally adjustable
|
Temperature
Digitally adjustable
|
Pressure
Digitally adjustable
|
|
- Default
|
Picoampere
1 Hz
|
pH/mV
1 Hz
|
Temperature
1 Hz
|
Pressure
0.2 Hz
|
|
- Maximum
|
Picoampere
20 Hz
|
pH/mV
20 Hz
|
Temperature
20 Hz
|
Pressure
0.2 Hz
|
| Picoampere | pH/mV | Temperature | Pressure | |
|---|---|---|---|---|
|
Response time (90%)
|
Picoampere
<35 msec.
|
pH/mV
<35 msec.
|
Temperature
<35 msec.
|
Pressure
<5 sec.
|
|
Signal gain factor adjustment
|
Picoampere
0.1, 1, 10, 100
|
pH/mV
0.1, 1, 10, 100
|
Temperature
0.1, 1, 10, 100
|
Pressure
0.1, 1, 10, 100
|
|
Signal offset adjustment
|
Picoampere
±1 V
|
pH/mV
±1 V
|
Temperature
N/A
|
Pressure
N/A
|
| Feature | Standard |
|---|---|
|
Feature
Digital interface
|
Standard
USB
|
|
Feature
Analog In
|
Standard
2 channels 0-3.3V, 16 bit ADC (optional)
|
|
Feature
Analog Out
|
Standard
6 Channels 0-4V scaled or unscaled
|
|
Feature
Digital I/O
|
Standard
5 I/O optional
|
|
Feature
SensorTrace Logger
|
Standard
Included
|
|
Feature
Other Unisense Software
|
Standard
Optional: uSense Profile
|
|
Feature
Data rate
|
Standard
Default 1 samples/sec.
|
|
Feature
Software data output
|
Standard
CSV, Excel or SQL file
|
| Product | Description |
|---|---|
|
Product
O2 UniAmp
|
Description
1x pA for Oxygen, 1x Temp channel
|
|
Product
pH/Redox UniAmp
|
Description
1x mV for pH and Redox, 1x Temp channel
|
|
Product
H2 UniAmp
|
Description
1x pA for Hydrogen, 1x Temp channel
|
|
Product
N2O UniAmp
|
Description
1x pA for Nitrous Oxide, 1x Temp channel
|
|
Product
H2S UniAmp
|
Description
1x pA for Sulfide (H2S and SULF), 1x Temp channel
|
Text Guides
Quick Enquiry
Related products
High performance oxygen microsensor
UniAmp Multi Channel for all Unisense sensors and electrodes including optical sensors
Microprofiles with extreme accuracy, high spatial and temporal resolution
Detect hydrogen sulfide in your sample
Measure dissolved and gaseous hydrogen
Optode meter for accurate quantification
Measure dissolved and gaseous nitrous oxide
Miniaturized pH electrode
8-channel microsensor amplifier for in situ measurements
Waterproof MicroOptode amplifier
Sealed system to measure O2, H2, H2S, N2O, NO, pH, Redox, and temperature metabolism
Measure respiration of single eggs and embryos, crustaceans, larvae, and more.
